Conductivity / Resistivity Monitor / Controller Small Screen Hot Sales High Accuracy

High pure/ultrapure water measurement control, widely used for electronic, electric, pharmacy, fine chemistry, clinical medicine, life science.

Share:

Application

● Widely used for monitoring of all water treatment process, which have high performances in high salt water treatment, concentrated solution, recirculating cooling water, reclaimed water and ect.

● High pure/ultrapure water measurement control, widely used for electronic, electric, pharmacy, fine chemistry, clinical medicine, life science.

Feature

Conductivity Monitor/Controller

Small Screen Hot Sales High Accuracy Conductivity / Resistivity Controller

Model FunctionCCT-0100CCT-1100CCT-2000
Range

0~20/200/2000 μS/cm; (C=1.0cm- )

0~20/200/2000 ppm;  (C=1.0cm-1)

0~20 mS/cm;  (C=1.0cm-1)

0~200 mS/cm; (C=10.0cm-1)

0~20 μS/cm (C=0.1cm-1)

Accuracy1.5%(FS)
Temp.Comp.

The 25 ℃ basis,

automatic temperature compensation

Oper. Temp.0~100℃
Sensor

S-1.0-NTC10K-MINI;

JL-0.1-NTC10K;

JL-10.0-NTC10K J-1.0-NTC10K-MINI;

JF-0.1-NTC10K; SL-1.0-NTC10K;

JL-1.0-NTC10K;  JF-1.0-NTC10K;

Display3½ Bit LCD
Current output— — —Isolation 4~20mA
Control output— — —High limit relay
Power

AC 110V±10% 50/60Hz

AC 220V±10% 50/60Hz

Working environment

Ambient temperature:0~50℃

Relative humidity: ≤85%

Dimensions48×96×100mm(H×W×D)
Hole size45×92mm(H×W)
Installation modeEmbedded


Resistivity Monitor/Controller

Small Screen Hot Sales High Accuracy Conductivity / Resistivity Controller

Model FunctionCCT-0100CCT-1100CCT-2100
Range0~18.25MΩ·cm
Accuracy2.0%(FS)
Temp.Comp.

The 25 ℃ basis,

automatic temperature compensation

Oper. Temp.0~50℃
SensorJ-0.05-NTC-MINI; JL-0.05-NTC;  JF-0.05-NTC;
Display3½ Bit LCD
Current output— — —Isolation 4~20mA
Control output— — —Low limit relay
Power

AC 110V±10% 50/60Hz

AC 220V±10% 50/60Hz

Working environment

Ambient temperature:0~50℃

Relative humidity: ≤85%

Dimensions48×96×100mm(H×W×D)
Hole size45×92mm(H×W)
Installation modeEmbedded


NOTE:

1. High pure water and ultrapure water could not select open sampling measurement method. If the high pure water is exposed to the air, a lot of carbon dioxide would dissolve into the water immediately and the impurity inside the container and dusts in the air would also dissolve into the water which could cause serious errors. So high pure water could only adopt inclosed, running and side flow circulation method.  With open measurement method to test high pure water by using laboratory appliance is inadvisable.

2. Resin regeneration dirts would pollute the cell, please clean by alcohol cotton ball.

Package Picture

Small Screen Hot Sales High Accuracy Conductivity / Resistivity Controller

86 177 3119 6526 +86 177 3119 6526 3443004902